Full House Rewiring in Adelaide's North East
Sometimes patching isn't enough.
Eventually, an older home's wiring reaches the point where replacing a few circuits is no longer the safest or most economical option. Insulation breaks down, cable becomes brittle and electrical systems designed decades ago struggle to meet the demands of modern living.
A full house rewire replaces the ageing wiring throughout the home, bringing the electrical installation up to current standards while preserving as much of the home's character as possible.
PGE 357573
.png)
.jpeg)
Frequently Asked Questions
Most homes don't need rewiring simply because they're old. What matters is the condition of the wiring. I look for things like deteriorated insulation, outdated cable types, previous repairs, overloaded circuits and signs the wiring has reached the end of its service life. Many homes only need targeted repairs, while others are at the point where replacing the entire installation is the safest and most cost effective option.
Green goo is one of the clearest signs that older PVC cable has deteriorated. It happens when the plasticisers inside the insulation break down over time, creating a green residue that reacts with the copper conductors. As the cable continues to deteriorate, the insulation becomes brittle and the copper corrodes, increasing the likelihood of faults and unreliable connections. Once green goo is present, the affected wiring should be replaced. Unfortunately, it's not something that can be repaired.
Yes, but it comes with its own challenges. Unlike timber framed homes, brick walls often don't have cavities that allow new cables to be installed easily. Depending on the home, cables may need to be chased into the brickwork and re rendered afterwards, or installed in neat surface mounted ducting where concealed wiring isn't practical. Every home is different, so I assess the construction first and recommend the neatest and most practical solution.
Yes. Every full rewire is tested against the requirements of AS/NZS 3000 before it's energised. Once the work is complete, I'll issue a Certificate of Compliance, which confirms the installation has been completed to the required standard. It's an important document to keep with your records and may be requested if you sell the home or need to make an insurance claim following electrical work.
Definitely. If walls, ceilings or flooring are already being removed, it's often the ideal time to replace ageing wiring. Cable can be installed with far less disruption, and it's usually much more cost effective than returning once the renovation has been completed.
Usually yes, since a full rewire is the natural time to renew the board too. I confirm this in your quote.
