Electrical Fault Finding & Repairs in Adelaide's North East

Electrical faults rarely happen at a convenient time.

The lights suddenly stop working. Half the house loses power. A safety switch won't stay on. Or there's an electrical problem that seems to come and go without warning.

Finding the cause is often the hardest part.

I'll take the time to properly investigate the fault, explain what's happening in plain English and carry out the repairs needed to get your home safely back up and running.

Get Your Online Quote

Typically responds within 4 hours.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Located in Adelaide’s North East
Electrical Licence:
PGE 357573
Fixed Upfront Pricing, No Surprises
5 Star rated on Google
GPS tracker SMS when we're on the way!

Finding the cause, not just treating the symptoms

Electrical faults can be frustrating because the problem isn't always obvious.

Sometimes it's a faulty appliance.

Sometimes it's damaged wiring.

Sometimes it's simply an ageing switch, power point or light fitting that's reached the end of its life.

Replacing random parts rarely solves the problem.

Careful fault finding does.

The goal isn't just getting your power back today. It's making sure the same fault doesn't keep coming back.

Electrical faults I can help with

Whether you've completely lost power, have a safety switch that won't reset or you're chasing an intermittent electrical fault, I'll work through the problem methodically to identify the cause before recommending the right repair.

Tripping Safety Switches & Circuit Breakers

Find out why your safety switch or circuit breaker keeps tripping.

Loss of Power

Lost power to your entire home? Let's work out why.

Partial Loss of Power

Some of the house still working? I'll find out what's taken the rest offline.

Intermittent Electrical Faults

Electrical problem comes and goes? That’s exactly when proper fault finding matters.

Partial Rewiring

Targeted partial rewiring to replace unsafe wiring and improve electrical safety without a full home rewire.

Full House Rewiring

Complete house rewiring to replace outdated wiring and bring older homes up to modern electrical safety standards.

Before calling an electrician, there's one simple thing worth trying.

If your safety switch or circuit breaker has tripped, unplug everything connected to the affected circuit before trying to reset it.

Sometimes a faulty kettle, toaster, heater or another appliance is the cause of the problem rather than your home's wiring.

If the safety switch stays on with everything unplugged, reconnect each appliance one at a time until you find the one causing the issue.

If it still won't reset, or continues to trip after everything has been unplugged, it's time to investigate the electrical installation itself.

Sometimes a two minute check can save you an unnecessary call out.

Electrical faults don't always stay broken

One of the trickiest things about electrical faults is they often disappear when you least expect it.

A safety switch trips once, then works normally again.

Lights flicker for a few days before behaving perfectly.

A power point works sometimes but not others.

Those intermittent faults take patience to diagnose properly.

Rather than guessing, I work through the installation step by step until the cause is found.

Common reasons homeowners call me

• Your safety switch won't reset.
• Part of your home has lost power.
• Lights are flickering.
• Some power points have stopped working.
• A circuit breaker keeps tripping.
• Power cuts in and out unexpectedly.
• An electrical fault comes and goes.
• Something just doesn't seem right.

Built for established homes

Older homes often present unique challenges when fault finding.

Wiring may have been altered over decades, circuits extended during renovations or older accessories left in service well beyond their intended life.

Finding faults in established homes takes more than a quick look at the switchboard.

It takes experience, patience and a methodical approach.

That's the type of work I genuinely enjoy.

Trusted by homeowners across NE Adelaide

Straightforward work, straightforward results

"They came when they said they would, did the job right, and the bill matched the quote."
Jennifer Walsh
Homeowner, Portland
"I had a breaker that kept tripping. They diagnosed it in minutes and fixed it without trying to sell me a new panel. That's integrity."
Marcus Johnson
Homeowner, Seattle
"The whole rewiring project took less time than they estimated. They cleaned up after themselves and left everything working perfectly."
Elena Rodriguez
Homeowner, Vancouver
"Called on a Saturday morning with an electrical emergency. They answered, came out, and solved it before lunch. That's the kind of service you remember."
Thomas Bennett
Homeowner, Portland
"No upsell, no pressure, just solid work at a fair price."
Amanda Price
Homeowner, Eugene
"They explained what needed doing and why. Then they did it, and it stayed done."
Christopher Gray
Homeowner, Bend

Frequently Asked Questions

Why does my safety switch keep tripping?

A safety switch that keeps tripping is usually telling you there's a fault somewhere. It could be an appliance, damaged wiring, moisture or a fault on the circuit. Rather than continually resetting it, the important part is finding what's actually causing it.

Why have some of my power points or lights suddenly stopped working?

If several lights or power points stop working at once, there's usually a common cause somewhere on the circuit. It could be a tripped protective device, loose connection, damaged wiring or another electrical fault. Fault finding is about testing the circuit methodically until I find the cause.

Can you find an electrical fault that only happens sometimes?

Yes. Intermittent faults can take a bit more patience because they aren't always present when I arrive, but they can still be investigated. Details like what was running, the weather, when it happens and what trips can all help narrow it down.

What should I do if I smell burning or notice something getting hot?

Stop using the affected light, power point or appliance and switch the circuit off if it's safe to do so. Burning smells, heat, discolouration or crackling shouldn't be ignored. Get it checked before using it again.

Servicing Homes Across Adelaide’s North East

Electrical specialists for homes across:

Athelstone
Banksia Park
Dernancourt
Fairview Park
Golden Grove
Highbury
Holden Hill
Hope Valley
Houghton
Modbury
Modbury Heights
Inglewood
Paradise
Redwood Park
Ridgehaven
Rostrevor
St Agnes
Tea Tree Gully
Upper Hermitage
Wynn Vale

Don't see your area listed? Contact us - we may still be able to help!

Ready to Get Started

Get in touch to request a quote or organise electrical work in your home. I will get back to you shortly.

Request a Quote
Appliance installation in established home