Partial Loss of Power in Adelaide's North East
Half the house working and the other half isn't?
That's usually a very different problem to a complete power outage.
You might still have lights but no power points. The kitchen might be working while the bedrooms aren't. Or one section of the house may have suddenly gone completely dead.
When that happens, the fault is often isolated to a particular circuit or part of the electrical installation.
The good news is that narrowing the problem down usually gives us a very useful starting point.
Frequently Asked Questions
Homes are divided into multiple electrical circuits. If one circuit develops a fault or loses supply, everything else can continue working normally while that particular section goes dead.
Check your switchboard for a tripped safety switch or circuit breaker. If one has tripped, unplug everything connected to the affected area before resetting it. If it stays on, reconnect appliances one at a time to see whether one of them is causing the fault.
A switch showing as on doesn't guarantee the entire circuit is healthy. There could be a failed connection, damaged wiring or another fault further along the circuit that needs to be located through testing.
Lighting and power points are generally supplied by separate circuits, so it's possible for one to fail while the other continues working normally.
Yes. Depending on how the circuit is wired, a fault or failed connection at one point can affect other outlets further along the same circuit.
Not necessarily, but an unexplained loss of power shouldn't be ignored. If you notice burning smells, heat, crackling, sparking or damaged equipment, leave the affected circuit switched off until it's been checked.





.png)








