Electric Hot Water Systems in Adelaide's North East

Installing a new electric hot water system often requires more than just plumbing.

Whether you're replacing an older storage system or upgrading to a modern heat pump, I'll make sure the electrical side is completed safely, complies with current standards and is ready for your plumber to commission.

Get Your Online Quote

Typically responds within 4 hours.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Located in Adelaide’s North East
Electrical Licence:
PGE 357573
Fixed Upfront Pricing, No Surprises
5 Star rated on Google
GPS tracker SMS when we're on the way!

Safe electrical connections for modern hot water systems

‍

Many newer hot water systems have different electrical requirements to the one they're replacing.

‍

Before connecting your new system, I'll check the existing circuit, isolation requirements and switchboard to make sure everything is suitable. If upgrades are needed, I'll explain your options before any work begins.

Trusted by homeowners across NE Adelaide

Straightforward work, straightforward results

"They came when they said they would, did the job right, and the bill matched the quote."
Jennifer Walsh
Homeowner, Portland
"I had a breaker that kept tripping. They diagnosed it in minutes and fixed it without trying to sell me a new panel. That's integrity."
Marcus Johnson
Homeowner, Seattle
"The whole rewiring project took less time than they estimated. They cleaned up after themselves and left everything working perfectly."
Elena Rodriguez
Homeowner, Vancouver
"Called on a Saturday morning with an electrical emergency. They answered, came out, and solved it before lunch. That's the kind of service you remember."
Thomas Bennett
Homeowner, Portland
"No upsell, no pressure, just solid work at a fair price."
Amanda Price
Homeowner, Eugene
"They explained what needed doing and why. Then they did it, and it stayed done."
Christopher Gray
Homeowner, Bend

I can help if you're...

  • Replacing an old electric hot water system.
  • Installing a heat pump hot water system.
  • Renovating your laundry or utility area.
  • Upgrading to a more energy efficient system.
  • Working with a plumber who needs an electrician.
  • Unsure whether your existing electrical supply is suitable.

What to expect

Every installation starts by checking the existing electrical supply.

I'll confirm the circuit is suitable, install or upgrade the isolation where required, complete the electrical connection and carry out all the necessary testing before the system is commissioned.

If your new hot water system requires a dedicated circuit or switchboard upgrade, I'll explain everything before getting started.

Older homes often need electrical upgrades

Many established homes still have hot water systems connected to older electrical installations.

Replacing the system is a good opportunity to check that the electrical supply is still suitable and bring any necessary parts of the installation up to today's standards where required.

Why choose Lucid Electrical?

A hot water system is something you rely on every day.

I'll make sure the electrical side of the installation is completed properly, coordinate with your plumber where needed and leave you with a safe, compliant installation that's built to last.

Servicing Homes Across Adelaide’s North East

Electrical specialists for homes across:

Athelstone
Banksia Park
Dernancourt
Fairview Park
Golden Grove
Highbury
Holden Hill
Hope Valley
Houghton
Modbury
Modbury Heights
Inglewood
Paradise
Redwood Park
Ridgehaven
Rostrevor
St Agnes
Tea Tree Gully
Upper Hermitage
Wynn Vale

Don't see your area listed? Contact us - we may still be able to help!

Frequently Asked Questions

Do I need an electrician to replace my electric hot water system?

Yes. Any electrical disconnection or reconnection must be carried out by a licensed electrician.

Can you install the electrical supply for a heat pump hot water system?

Absolutely. I regularly install electrical supplies for both storage and heat pump hot water systems.

Will my existing circuit be suitable?

Not always. I'll inspect the existing circuit first and let you know if any upgrades are required.

Can you work with my plumber?

Yes. I regularly coordinate with plumbers to make sure the installation runs smoothly.

Will I need a switchboard upgrade?

Not necessarily. If your existing installation isn't suitable for the new system, I'll explain your options before carrying out any additional work.

Will I receive a Certificate of Compliance?

Yes. You'll receive a Certificate of Compliance once the electrical work is complete.

Ready to Get Started

Get in touch to request a quote or organise electrical work in your home. I will get back to you shortly.

Request a Quote
Appliance installation in established home