Dedicated Circuits in Adelaide's North East

Many modern appliances need their own dedicated electrical circuit to operate safely and reliably.

Whether you're installing an induction cooktop, electric oven, EV charger, air conditioner or heat pump hot water system, I'll make sure it's supplied by the correct circuit with the appropriate protection for your home.

Get Your Online Quote

Typically responds within 4 hours.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Located in Adelaide’s North East
Electrical Licence:
PGE 357573
Fixed Upfront Pricing, No Surprises
5 Star rated on Google
GPS tracker SMS when we're on the way!

What is a dedicated circuit?

‍

A dedicated circuit supplies power to one appliance only.

‍

High powered appliances draw significantly more electricity than general power points or lighting circuits were designed to handle. Giving them their own circuit improves safety, reduces the risk of overloading existing wiring and helps ensure the appliance performs the way it was designed.

Trusted by homeowners across NE Adelaide

Straightforward work, straightforward results

"They came when they said they would, did the job right, and the bill matched the quote."
Jennifer Walsh
Homeowner, Portland
"I had a breaker that kept tripping. They diagnosed it in minutes and fixed it without trying to sell me a new panel. That's integrity."
Marcus Johnson
Homeowner, Seattle
"The whole rewiring project took less time than they estimated. They cleaned up after themselves and left everything working perfectly."
Elena Rodriguez
Homeowner, Vancouver
"Called on a Saturday morning with an electrical emergency. They answered, came out, and solved it before lunch. That's the kind of service you remember."
Thomas Bennett
Homeowner, Portland
"No upsell, no pressure, just solid work at a fair price."
Amanda Price
Homeowner, Eugene
"They explained what needed doing and why. Then they did it, and it stayed done."
Christopher Gray
Homeowner, Bend

You may need a dedicated circuit if you're installing...

  • An induction cooktop
  • An electric oven
  • An EV charger
  • An air conditioner
  • A heat pump hot water system
  • Pool or spa equipment

What's involved in installing a dedicated circuit?

Every installation starts by assessing your existing switchboard and planning the neatest cable route to the new appliance.

I'll install a new circuit with the appropriate cable size and circuit protection, test the installation thoroughly and make sure everything is operating correctly before the job's completed.

If your switchboard needs upgrading to safely accommodate the new circuit, I'll explain why before any work begins.

Dedicated circuits in established homes

Installing new circuits in established homes often takes a little more planning.

Brick walls, limited roof access and older switchboards can all influence the best cable route. I always look for the neatest solution possible, keeping visible conduit to a minimum wherever practical while working with the existing structure of your home.

Why choose Lucid Electrical?

Adding a dedicated circuit isn't just about running another cable.

It's about making sure your home's electrical system is ready for the appliance you're installing, both now and into the future. I'll explain what's required, provide a fixed upfront quote and complete the installation neatly with minimal disruption to your home.

Frequently Asked Questions

Why does my new appliance need its own circuit?

High powered appliances draw much more electricity than standard household circuits are designed to supply. A dedicated circuit provides the capacity and protection they need.

Can you install a dedicated circuit in an older home?

Absolutely. I specialise in established homes and always look for the neatest cable route while working with the existing structure of your home.

Will my switchboard need upgrading?

Not always. I'll inspect your existing switchboard first and let you know if it has the capacity to safely accommodate the new circuit.

Can you install dedicated circuits for induction cooktops?

Yes. I regularly install dedicated circuits for induction cooktops, ovens, EV chargers, air conditioners and other high powered appliances.

Will there be visible conduit?

Where possible, I use existing roof and wall cavities to keep visible conduit to a minimum. If conduit is unavoidable, I'll discuss the options with you beforehand.

Will I receive a Certificate of Compliance?

Yes. Every dedicated circuit is tested before it's energised, and you'll receive a Certificate of Compliance once the work is complete.

Servicing Homes Across Adelaide’s North East

Electrical specialists for homes across:

Athelstone
Banksia Park
Dernancourt
Fairview Park
Golden Grove
Highbury
Holden Hill
Hope Valley
Houghton
Modbury
Modbury Heights
Inglewood
Paradise
Redwood Park
Ridgehaven
Rostrevor
St Agnes
Tea Tree Gully
Upper Hermitage
Wynn Vale

Don't see your area listed? Contact us - we may still be able to help!

Ready to Get Started

Get in touch to request a quote or organise electrical work in your home. I will get back to you shortly.

Request a Quote
Appliance installation in established home